Digital Monitoring Products 7060A Guia de Instalação Página 16
- Página / 28
- Índice
- MARCADORES
Avaliado. / 5. Com base em avaliações de clientes
14 LCD Keypad Installation Guide
LCD Keypad Installation Guide 15
WIEGAND CODE
LENGTH: 45
Custom Card Denitions
(7063/7063A, 7073/7073A, 693/793 only)
When using a custom credential, enter the total
number of bits to be received in Wiegand code
including parity bits. Press any top row Select key
to enter a number between 0-255 to equal the
number of bits. Default is 45 bits.
Typically, an access card contains data bits for a
site code, a user code, and start/stop/parity bits.
The starting position location and code length must
be determined and programmed into the keypad.
0 1 1 1 0 1 0 1 1 1 0 0 1 1 0 1 0 1 0 0 0 1 1 0 0 1 1 0 0 0 1 0 1
First Bit
Received
Bit = 0
Position = 0
Site Code
Bit = 1
Position = 1
Length = 10
User Code
Bit = 0
Position = 11
Length = 20
Last Bit
Received
Bit = 1
Position = 33
In this example the Wiegand Code Length = 33 bits.
Figure 8: Data Stream Bit Location Example
SITE CODE
POSITION: 1
Site Code Position
(7063/7063A, 7073/7073A, 693/793 only)
When using a custom credential, enter the site
code start position in the data string. Press any
Select key to enter a number between 0-255.
Default is 1. Press COMMAND to save the entry.
SITE CODE
LENGTH: 1
Site Code Length
(7063/7063A, 7073/7073A, 693/793 only)
When using a custom credential, enter the number
of characters the site code contains. Press any
Select key to enter a number between 1-16.
Default is 1. Press COMMAND to save the entry.
- INSTALLATION GUIDE 1
- DMP Keypads 3
- Installing the Keypad 4
- Harness Wiring 4
- – Zone 1 5
- Additional Power Supply 6
- Keypad Bus Monitor 6
- Card Readers 6
- Wiring the 333 Suppressor 7
- Door Strike Relay 7
- Operation 7
- 8
- 8
- 8
- Internal Speaker Operation 9
- Backlighting 9
- End-User Options 9
- Backlighting Brightness 10
- Internal Speaker Tone 10
- Internal Volume Level 10
- Model Number 10
- Keypad Address 10
- Special Character 11
- First Letter 11
- Second Letter 11
- Third Letter 11
- Keypad Options (KPD OPT) 12
- Keypad Mode 12
- Default Keypad Message 13
- Arm Panic Keys 13
- 7/0 Panic 13
- Zone 2 Soft-Shunt Time 14
- (7073/7073A, 793 only) 14
- Relock on Zone 2 Fault? 14
- Site Codes 5-8 18
- Number of User Code Digits 18
- Degraded Mode 19
- Additional Programming 21
- User’s Guide 22
- Keypad Arming and Disarming 22
- Keypad Door Strike 23
- Keypad Entry Delay 23
- FCC Information 24
- Wiring Specications 25
- Keypad Specications 26
- Specications 27
- Compatibility 27
- Listings and Approvals 27
- Accessories 27
- LT-0883 (5/06) 28
Manuais e produtos relacionados com Teclados numéricos Digital Monitoring Products 7060A
(65 páginas)Sony VPL-HS1 Handbücher
Bedienungsanleitungen und Benutzerhandbücher für Heimkinosysteme Sony VPL-HS1.
Wir stellen 1 PDF-Handbücher Sony VPL-HS1 zum kostenlosen herunterladen nach Dokumenttypen zur Verfügung Bedienungsanleitung
Comentários a estes Manuais