Digital Monitoring Products Graphic Touchscreen Guia do Utilizador descarregar pdf (Página 39)

System Setup XT30/XT50 User Guide 35

Deleting User codes

User Code Level: Master only.

1. Access the User Menu.

2. Press the COMMAND key until USER CODES? displays.

3. Press any Select key.

The keypad displays ADD DEL CHG SEND.

4. Select DEL to delete a user code from the system.

5. At the USER NUMBER: — prompt, enter the user number you

want to delete and press COMMAND. The display changes to

USER # DELETED.

6. The display then changes back to USER NUMBER: — for you

to delete another user. Press the Back Arrow key twice to exit

the User Menu.

Sending User codes to Z-Wave locks

User Code Level: Master only.

Your system may be pre-programmed at installation to support Z-

Wave door locks. This option allows you to send user codes for

user numbers 2-20 (Master and Standard) to all compatible Z-Wave

locks. Once codes have been received by the lock, a valid user

code entered at the lock (by user number 2-20) will lock the door

or unlock and disarm the system according to the user’s privileges.

1. Access the User Menu.

2. Press the COMMAND key until USER CODES? displays.

3. Press any Select key. The keypad displays ADD DEL CHG SEND.

4. Select SEND to send user codes of user numbers 2-20 (Master

and Standard) to all compatible Z-Wave locks on your system.

The keypad displays the progress of user codes being sent. The

process may take several minutes.

5. If all locks receive the user codes, the display will return to

the Status List.

6. If a lock does not receive the user codes, the keypad displays

CODES NOT SENT TO ALL LOCKS.

Changing User codes

User Code Level: Master only.

1. Access the User Menu.

2. Press the COMMAND key until USER CODES? displays.

Press any Select key.

The keypad displays ADD DEL CHG SEND.

4. Select CHG to change a user code.

5. At the USER NUMBER: — prompt, enter the user number to

change and press COMMAND.

6. The display changes to CODE NO: * * * *. Enter the new

user code.

If the code you entered is already in use, or is a code used

internally by the system, the keypad displays ALREADY IN

USE. You must enter a different 4-digit user code.

7. The display then shows the current user name. Press any top

row key to clear. See Entering Names in Appendix C to enter

a new name.

8. If you are changing a code other than your own, the keypad

next displays LEVEL?.

9. Press any Select key. The keypad displays

SCH LTD STD MSTR.

Refer to item number 10 in the Adding User Codes section on the

previous page.

Note: Changing a user code does not change the user number.

User number 2 may have their user code changed from

1234 to 5678 but they are still user number 2.

1 2 ... 34 35 36 37 38 39 40 41 42 43 44 ... 66 67

Comentários a estes Manuais

Sem comentários

Digital Monitoring Products Graphic Touchscreen Guia do Utilizador Página 39

Comentários a estes Manuais

Manuais e produtos relacionados com Sistemas de segurança - controlo de acesso Digital Monitoring Products Graphic Touchscreen