Digital Monitoring Products 1912XR Guia do Utilizador Página 14
- Página / 40
- Índice
- MARCADORES
Avaliado. / 5. Com base em avaliações de clientes
11
Home/Away System Arming
Area Assignment: Your security system is divided into two or three
separate areas. Motion detectors, inside doors, and other interior
devices are assigned to an
Interior
and possibly
Bedroom
area while
windows and exterior doors, are assigned to a
Perimeter
area.
Arming the system: When arming a Home/Away system, the
keypad displays HOME AWAY or HOME SLEEP AWAY. If you
select AWAY, you arm all areas of the system. You’ll want to arm all
areas when leaving with nobody staying inside. Selecting HOME
arms only the Perimeter of the system. Perimeter arming is for when
you’re staying inside but want the comfort of knowing the exterior
doors and windows are armed. Perimeter arming allows you to move
freely about inside without setting off any interior alarms.
Selecting SLEEP arms the Perimeter and Interior devices but leaves
devices near bedrooms or other nighttime areas off.
System Ready/System Not Ready Keypad Displays
When all loops in the system are in a normal condition and can be
armed without bypassing, the keypad displays SYSTEM READY. If
there are one or more loops that are not in a normal condition, the
keypad displays SYSTEM NOT READY. Pressing any top row
SELECT key during this display shows the loop number and name
allowing you to investigate the problem.
Arming a Home/Away System
1. Enter a 1 to 3 digit code and press the COMMAND key or enter
a 4 digit code without pressing the COMMAND key. The keypad
displays HOME AWAY or HOME SLEEP AWAY (your system
may have two
or
three areas.
2. Select HOME to arm the Perimeter only.
3. Select SLEEP to arm the Perimeter and Interior.
4. Select AWAY to arm the Perimeter, Interior, and Bedroom.
5. The Security Command displays loops that have been bypassed
prior to arming and 24 hour loops that are in a bad condition. No
action is required by you.
6. Bypass any bad loops if required. See steps 6a through 6c.
6a. If a problem exists on one or more loops, the loop name and
problem is displayed followed by BYPASS? NO YES.
6b. Select NO to stop the arming sequence without bypassing
any loops. Correct the problem and return to step 1.
6c. Select YES to bypass all bad non-24 hour loops.
7. The Security Command displays PERIMETER ON if you selected
HOME, PERIM/INT ON if you selected SLEEP, and ALL SYSTEM
ON if you selected AWAY. The system then arms all non-exit
loops.
8. The Security Command next displays EXIT: ## INSTNT and
begins to count down the number of seconds remaining for you
to exit. When the delay expires, the exit loops are armed.
9. You can select INSTNT while EXIT: ## INSTNT is displayed to
immediately arm all exit loops and make them instant. The
keypad displays INSTANT.
10. When the system is fully armed, the keypad displays PERIMETER
ON for Perimeter arming, PERIM/INT ON for Perimeter and
Interior arming, and ALL SYSTEM ON for all areas armed.
Arming and Disarming
- USER'S GUIDE 1
- Table of Contents 2
- Introduction 4
- The Security Command Keypad 5
- Special Wireless Displays 6
- How your System Operates 9
- Area System Arming 10
- Area System Disarming 11
- All/Perimeter System Arming 12
- Arming and Disarming 13
- Disarming During an Alarm 13
- Home/Away System Arming 14
- Home/Away System Disarming 15
- User Menu 16
- Door Access 17
- Armed Areas Display 17
- Outputs On Off 18
- Loop Status 18
- Loop Status continued 19
- Bypass Loops 19
- Loop Monitor 20
- System Status 21
- System Test 21
- User Codes 22
- Ambush Codes 23
- User Codes continued 23
- Schedules 25
- Schedules continued 26
- Date and Time 29
- Display Events 30
- Loop Event Displays 31
- Supervisory Event Displays 33
- Door Access Event Displays 33
- Security Command keypads 34
- System Setup 34
- Output relays 35
- Area names and numbers 35
- Standard User Codes 37
- Frequently asked questions 38
- LT-0172 (1/96) 40
Manuais e produtos relacionados com Sistemas de segurança - controlo de acesso Digital Monitoring Products 1912XR
Sistemas de segurança - controlo de acesso Digital Monitoring Products Canadain XR500 Guia de Instalação
(40 páginas)
(40 páginas)
Sistemas de segurança - controlo de acesso Digital Monitoring Products XR550 Guia de Instalação
(26 páginas)
(26 páginas)
Sistemas de segurança - controlo de acesso Digital Monitoring Products XTL Series Manual do Utilizador
(2 páginas)
(2 páginas)
Sistemas de segurança - controlo de acesso Digital Monitoring Products XR20 Guia de Instalação
(52 páginas)
(52 páginas)
Sistemas de segurança - controlo de acesso Digital Monitoring Products XTL Series Manual do Utilizador
(18 páginas)
(18 páginas)
Sistemas de segurança - controlo de acesso Digital Monitoring Products XTL Series Manual do Utilizador
(4 páginas)
(4 páginas)
Sistemas de segurança - controlo de acesso Digital Monitoring Products Canadian XR100 Guia de Instalação
(36 páginas)
(36 páginas)
Sistemas de segurança - controlo de acesso Digital Monitoring Products XR150 Manual do Utilizador
(4 páginas)
(4 páginas)
Sistemas de segurança - controlo de acesso Digital Monitoring Products XR550 Manual de Instruções
(78 páginas)
(78 páginas)
Sistemas de segurança - controlo de acesso Digital Monitoring Products XR20 Guia de Instalação
(31 páginas)
(31 páginas)
Sony VPL-HS1 Handbücher
Bedienungsanleitungen und Benutzerhandbücher für Heimkinosysteme Sony VPL-HS1.
Wir stellen 1 PDF-Handbücher Sony VPL-HS1 zum kostenlosen herunterladen nach Dokumenttypen zur Verfügung Bedienungsanleitung
Comentários a estes Manuais