Digital Monitoring Products Graphic Touchscreen Guia do Utilizador descarregar pdf (Página 15)

8 XR150/XR350/XR550 User’s Guide Introduction

Fire Alarm tone:Asweepingsirenthatsoundsuntiltherealarm

is silenced. From LCD keypads only.

Burglary Alarm tone: A constant siren tone that continues until

the alarm is silenced. From LCD keypads only.

Key press tone: A short beep each time you press a key on the

keypad and it is acknowledged by the system.

Prewarn tone: A pulsed tone that sounds when you open an entry

delay door on a system that is armed (turned on) reminding you

to disarm the burglary protection. The tone silences as soon as

therstusercodedigitkeyispressed.Ifavalidusercodeisnot

enteredoraninvalidusercodeisenteredwithinveseconds,the

prewarn tone begins sounding again.

Exit tone: A pulsing tone that sounds during the exit countdown

just after arming all areas of your system to remind you to exit the

premise. At ten seconds prior to the end of the countdown, the

rate of pulsing increases.

Monitor tone: A pulsed tone for one second, one pulse only that

sounds whenever a door or window is opened while you are using

thezonemonitorfunctionfromtheUserMenu.LCDkeypadssound

a doorbell chime. See Zone Monitor.

Note: When toggling to a RMV monitor state, the Zone Monitor

tone does not sound.

Trouble tone: A steady tone indicating a trouble condition on your

system. Press a Select key to silence.

What to do when the trouble tone sounds

You can silence the trouble tone by pressing any key.

This only silences the keypad and does not correct

the condition that originally caused the trouble.

Internal Speaker Tone

Set the tone of the keypad internal speaker. At the SET TONE

display, use the top left Select key to make the tone lower. Use the

right Select key to make the tone higher.

Volume level

Set the volume level of the keypad internal speaker for key

presses. During alarm, trouble, and prewarn conditions, the

volumeisalwaysatmaximumlevel.AtSETVOLUMELEVEL,usethe

left Select key to lower the keypad volume. Use the right Select

key to raise the volume.

Model Number

Thinline™, Aqualite™, Wireless, Clear Touch, and

Graphic Touchscreen Keypads:

Thekeypadmodelnumber,rmwareversion,anddatedisplay,but

cannot be changed.

Serial Number

Thinline™ Wireless Keypads:

The serial number assigned to the keypad displays. Press the Back

ArrowkeytoexittheUserOptionsfunction.

Keypad Address

The current address assigned to the keypad displays, but cannot

be changed. Press the Back Arrow key to exit the User Options

function.

Special Keypad Tones

Your keypad also contains a small speaker that alerts you about

events as they occur on your system. For burglary alarms, as soon

astherstdigitkey is pressedtoenterausercode,the keypad

tone stops. If a valid user code is not entered or an invalid user

code is entered within ve seconds, the tone begins sounding

again. Below are brief descriptions of the different tones you hear

from the keypad.

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 83 84

Comentários a estes Manuais

Sem comentários

Digital Monitoring Products Graphic Touchscreen Guia do Utilizador Página 15

Comentários a estes Manuais

Manuais e produtos relacionados com Sistemas de segurança - controlo de acesso Digital Monitoring Products Graphic Touchscreen