Digital Monitoring Products Graphic Touchscreen Guia do Utilizador descarregar pdf (Página 21)

14 XR150/XR350/XR550 User’s Guide Arming and Disarming

Regardless of which conguration is programmed, much of the

operation is similar. Throughout this guide, any differences

between the systems are noted for your convenience.

Arming Functions

Arming or Disarming: You can arm and disarm all areas at one

time or each area individually. You can only arm or disarm areas

authorizedforyourusercode.

Arm All or Selective Arming: After entering your user code, the

system allows you to arm either all of the areas to which you have

access or one or more selected areas. If you choose to arm all

areas, the system begins verifying that all zones in those areas

are in a good condition. If you choose to arm selected areas, the

system prompts you to choose the areas you want to arm.

Aftermakingyourarmingselection,thekeypaddisplaysanyzones

that are currently bypassed. These zones remain bypassed until

the system is armed and then disarmed.Any 24-hour zones in a

faulted condition also display.

Bypassing Zones: Beforearming,thesystemveriesthatalldoors,

win dows, and other protection devices to be armed are in normal

condition.Ifeverythingisveried,thesystemarms.Ifthereisa

problem on one or more burglary zones, the system cannot arm

until the problem is corrected. If the problem is simply an open

door or window, correct the problem and try arming again.

If the problem cannot be corrected, you can force arm or bypass

the zone or wait until the zone can be repaired by a service

technician. A force armed zone is ignored by the system until

it restores to normal.A bypassed zone is ignored by the system

duringtheentirearmedperiod.Azoneremainsbypasseduntilthe

system is disarmed.

Insome cases, youmightseethekeypad display FRONTDOOR —

FAULT.Thekeypadthendisplayspriorityzonewhichisazonethat

cannotbebypassed.Theproblemonthezonemustbecorrected

before the system can be armed.

Whenchoosingtobypassaprotectiondeviceorzone,theremay

be a pre-programmed maximum number of zones (up to 8) that

can be bypassed in an area when that area is being armed. This

limit is programmed at installation.

Arming Messages:

For Area systems the keypad briey displays SYSTEM ON if only

selectedareasarearmed.ThekeypadbrieydisplaysALLSYSTEM

ONwhenallareasinthesystemarearmed.

For All/Perimetersystemsthe keypad briey displaysPERIMETER

ONifonlyselectedareasarearming.Thekeypadbrieydisplays

ALLSYSTEMONwhenallareasinthesystemarearmed.

For Home/Sleep/AwaysystemsthekeypaddisplaysHOMESYSTEMON

or SLEEP SYSTEM ON if only selected areas are arming. The keypad

brieydisplaysALLSYSTEMONwhenallareasinthesystemarearmed.

For Home/Sleep/Away with Guest systems the main system arms

the same as a Home/Sleep/Away system. A keypad assigned to the

rstguesthousesystemdisplaysHOMEGUEST1ONorSLEEPGUEST1

ONifonlyselectedareasarearming.ThekeypaddisplaysALLGUEST

1ONwhenallareasintheguesthousesystemarearmed.

Exit Delay: The keypad then displays the exit delay time as it counts

down. Your system may be pre-programmed at installation to beep

the exit delay tone at eight-second intervals until the last 10 seconds

when the keypad beeps at three-second intervals. After exiting the

building, if you re-enter during the countdown the exit countdown

restarts, allowing additional time to then disarm or again exit the

building during the countdown. This restart can occur only one time.

Whentheexitdelaytimeexpires,alldisarmedzonesarearmed.

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 83 84

Comentários a estes Manuais

Sem comentários

Digital Monitoring Products Graphic Touchscreen Guia do Utilizador Página 21

Comentários a estes Manuais

Manuais e produtos relacionados com Sistemas de segurança - controlo de acesso Digital Monitoring Products Graphic Touchscreen