Digital Monitoring Products Canadain XR500 Manual de Instruções descarregar pdf (Página 31)

XR500 Series Programming Guide Digital Monitoring Products

Device Setup

6.18.15 No Communication with Panel

This option denes the relay action when communication with the panel has not occurred

for ve seconds. Press any top row Select key to display relay action options. Press the

Back Arrow key to return to the NO OF USER CODE DIGITS:.

Choose the action required:

Press the rst Select key to choose OFF [Default] (Relay Always Off) — The relay does not

turn on when any Wiegand string is received. Off does not affect any REX operation.

Press the second Select key to choose SITE (Accept Site Code) — Door access is granted

when the Wiegand site code string received matches any site code programmed at SITE

CODE ENTRY. For details refer back to the REQUIRE SITE CODE option.

Press the third Select key to choose ANY (Any Wiegand Read) — Door access is granted

when

any Wiegand string is received.

Press the fourth Select key to choose ON (Relay Always On) — The relay is always on.

Press the COMMAND key to display the next action.

Press the rst Select key to choose LAST (Keep Last State) — The relay remains in the

same state and does not change when communication is lost.

After choosing the action, the NO COMM WITH PNL option and the newly dened action

display.

Programming is now complete. Press the COMMAND key to display DEVICE NO.

NO COMM WITH PNL

OFF SITE ANY ON

NO COMM WITH PNL

OFF

NO COMM WITH PNL

LAST

NO COMM WITH PNL

SITE

NO COMM WITH PNL

ANY

NO COMM WITH PNL

1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 83 84

Sem comentários

Digital Monitoring Products Canadain XR500 Manual de Instruções Página 31