Digital Monitoring Products XR550 Guia do Utilizador descarregar pdf (Página 14)

10 XR150/XR350/XR550 User Guide Introduction

Special Keypad Displays

As you use your system, you occasionally see a keypad display

that asks you to enter a code or that describes a condition on the

system. Below are some examples of the keypad displays:

ALARM

A 24-hour zone (forexample re or panic) or an armed burglary

zonehasbeentripped.Yoursystemmaysoundbellsorsirens.

TRBL (TROUBLE)

There is a problem with a protection device or system component.

This display is accompanied by a description of the problem.

ALARM NOT SENT

The alarm signal was aborted and was not sent to the central

station because a valid user code was entered to disarm the

system before the alarm signal was sent to the central station.

Also, your system may be pre-programmed at installation to send

an Abort signal to the Central Station that an alarm occurred but

was not sent because the user entered a code before the delay

time expired.

ALARM CANCELLED

An Alarm signal just sent to the central station was cancelled

because a valid user code was entered to disarm the system after

the alarm was sent. Also, an Alarm Cancel signal is sent to the

Central Station.

ALARM VERIFIED

Avalidburglaralarmhasoccurredandhasbeenmanuallyveried

by the user. The alarm system also transmits a VERIFY message to

the Central Station.

ENTER CODE OR PRESENT CARD

The system requires you to enter your user code or present your

user card/proximity credential to a keypad or card reader. User

codesorreadscanberequiredforturningyoursystemon(arming),

turningyoursystemoff(disarming),andmanyotherfunctions.

As you enter your user code, the keypad display shows an asterisk

(*) in place of each digit pressed.This keeps others from seeing

your user code on the display as it is entered.

TRY AGAIN OR INVALID CODE/CARD/PIN

Theusercode,cardread,orPINyouhaveusedisnotrecognized

bythesystemorisnotauthorizedintheirproleforthatfunction.

Check the User Code or PIN, or present the card to the reader

again.

INVALID PROFILE

All user codes have a prole that allow the user to only access

certain functions. When users attempt functions outside their

authority,theINVALIDPROFILEmessagedisplays.

INVALID AREA

A user has attempted a door access for an area they are not

assigned.

INVALID TIME

Auser code assigned to aspecicschedule is entered outside of

the valid schedule. See Schedules and User Codes.

ARMED AREA

A user has attempted a door access to an armed area to which they

do not have arming and disarming authority.

FAILED TO EXIT (ANTI-PASSBACK)

Anti-passbackrequiresuserstoproperlyexit(egress)anareathey

have previously accessed. If they fail to exit through the proper

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 87 88

Comentários a estes Manuais

Sem comentários

Digital Monitoring Products XR550 Guia do Utilizador Página 14

Comentários a estes Manuais

Manuais e produtos relacionados com Sistemas de segurança - controlo de acesso Digital Monitoring Products XR550