Digital Monitoring Products XR550 Guia do Utilizador descarregar pdf (Página 17)

XR150/XR350/XR550 User Guide 13Introduction

Note: The XR150 system allows one guest house system while the

XR350 and XR550 allows two guest house systems.

Also,forkeypadsthatincludeanArmedLED,theArmedLEDisON

steadywhenALLareasassignedtothatkeypadarearmedandOFF

when any area assigned to that keypad is disarmed.

ViewZoneStatus

To view disarmed zones that are in fault, press any Select key

when the status list displays.

Browser Feature

Refer to Appendix B at the back of this guide for diagrams showing

you how to use the built-in browsers.

If your Area system is setup with nine or higher areas and the

systemisarmed,thedisplayreads:ALLSYSTEMONorSYSTEMON.

Refer to Checking Armed Areas for information about checking the

armed areas.

If your system is set up as a Home/Sleep/Away or All/Perimeter

system, one of the following displays indicate the current Armed

Status:

The keypad displays When

HOME SYSTEM ON The perimeter is armed in a Home/

Sleep/Away system.

PERIMETER ON The perimeter is armed in an All/

Perimeter system.

ALL SYSTEM ON All areas are armed.

SLEEP SYSTEM ON The perimeter and interior are armed

but the bedroom area is disarmed.

If your system is set up as a Home/Sleep/Away with Guest system,

the arming status of the main system is the same as a standard

Home/Sleep/Away system. The current arming status of the Guest

systems displays as follows:

The keypad displays When

HOME GUEST 1 ON Therstguesthouseperimeteris 

armed in a Home/Sleep/Away with

Guest system.

SLEEP GUEST 1 ON Therstguesthouseperimeterand

interior are armed but the bedroom

area is disarmed.

ALL GUEST 1 ON Allrstguesthouseareasarearmed.

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 87 88

Sem comentários

Digital Monitoring Products XR550 Guia do Utilizador Página 17