Digital Monitoring Products XR550 Guia do Utilizador descarregar pdf (Página 16)

12 XR150/XR350/XR550 User Guide Introduction

Disarming

Turns off one or more areas of the system. When disarmed, the

systemdoesNOTsoundalarmsorsendalarmreportstoacentral

stationwhenaburglaryzonefaults.

Fault

YoumayseethekeypaddisplayFRONTDOOR—FAULT.Thismeans

that there is a problem with the front door, such as the door being

openwhenyouarearmingthesystem.Ifyouseea—FAULTdisplay,

attempttocorrecttheproblem(inthiscaseshutthedoor).After

thezoneisinanormalstate,youmay armthesystem.Youmay

alsobypassthezoneandthenarmthesystem.

Zone

A zone refers to one or more protected openings (doors or

windows) or protection devices (motion or glassbreak detectors)

groupedtogetherunderthesamezonenameandnumber.

Often,similardevicesinthesamegenerallocationsharethesame

zone.Forexample,thewindowsontheeastsideofthepremises

canallbegroupedtogetherinazonenamedE.WINDOWS.

Instant Zone

Interior protection devices and perimeter devices, such as exterior

windows, passive infrared detectors (PIR), and non entry doors,

aretypicallynotprogrammedwithdelaytimes.Ifthesezonesare

tripped while the system is armed, an alarm instantly occurs.

24-hour Zone

A24-hourzoneisnotturnedonoroffbyarmingordisarmingyour

system. Some examples of 24-hour zones are re zones, panic

zones,andtemperaturecontrolzones.

Entry or Exit zone

Almost all systems have one or more doors through which you can

access the premises. These doors are programmed with a delay

time to allow you to enter or exit without setting off the alarm.

When you arm the system, activity on this zone is ignored until

theexitdelaytimeexpires.Once that time has expired and the

system is fully armed, opening the door causes the panel to start

the entry delay time. During the entry delay time, you must enter

a valid user code to disarm the system or an alarm occurs.

Status

Status is a feature that automatically displays the armed or dis-

armed status of your system on the keypads. Alarm or trouble

conditions on a zone or a system monitor such as AC or battery

trouble can also display. There are two types of status information

available: Armed Status and Status List.

Status List

The keypad Status List displays any alarm or trouble condition on

azone,andanytroubleconditiononaninternalsystemmonitor.

The system monitors include the AC power, battery power, panel

box tamper, printer, and phone lines. If more than one alarm or

trouble condition occurs at the same time, the keypad sequences

this information on its display.

Ifthealarmisfroma24-hourzoneorasystemmonitor,itremains

in the Sta tus List until it re stores. If one or more armed burglary

zones trip at the same time, the last one to trip remains in the

Status List. This is to ensure that if a burglary has occurred the last

zonetrippedremainsdisplayedevenifithasbeenrestored.

Armed Status

Armed Status is the keypad display of the current armed condition

of areas within your security system.

If your system is set up as an Area system with areas one to eight,

thedisplayshows:12345678.Whenyouarmareas1,3,5,and

7 the keypad displays: 1 3 5 7.

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 87 88

Comentários a estes Manuais

Sem comentários

Digital Monitoring Products XR550 Guia do Utilizador Página 16

Comentários a estes Manuais

Manuais e produtos relacionados com Sistemas de segurança - controlo de acesso Digital Monitoring Products XR550