Digital Monitoring Products XR20 Guia de Instalação descarregar pdf (Página 9)

XRSuper6/XR20/XR40 Installation Guide Digital Monitoring Products

IntRoduCtIon

System Components

3.1 Description

The DMP system is made up of an alarm panel with built in communicator, an enclosure, a 16.5 VAC

transformer, and a 12 VDC 7.0 Ah battery. You can add Security Command keypads to the system and can

also connect auxiliary devices to the panel’s open collector outputs to expand the basic system. Combined

current requirements of additional modules may require an auxiliary power supply. Refer to the Standby

Battery Power Calculation section in this guide when calculating power requirements. In addition, up to 32

points of zone expansion can be added to the XR40, and 16 points to the XR20 and XRSuper6.

3.2 Wiring Diagram

The system wiring diagram in Figure 1, on the following page, shows some of the accessory devices you can

connect for use in various applications. A complete description of each module follows.

3.3 Lightning Protection

Metal Oxide Varistors and Transient Voltage Suppressors help protect against voltage surges on input and

output circuits. A transorb is provided for the Smoke Detector Output Circuit (Terminal 11). This transient

protection provides additional resistance to electrical surges such as lighting. Additional surge protection is

available by installing the DMP 370 or 370RJ Lightning Suppressors.

3.4 Accessory Devices

Interface Adaptor and Interface Cards

733, 734 Wiegand Interface

Cards

Provides system codeless entry, and arming and disarming using access control readers.

Zone and Output Expansion Modules

710 Bus Splitter/Repeater Allows you to increase keypad wiring distance to 2500 feet.

711 Single Point Zone Expanders Provides one Class B zone for connecting burglary devices.

714, 714-8, 714-16 Zone

Expanders

Provides Class B zones for connecting burglary and non-powered re devices.

712-8 Zone Expander Provides Class B zones for connecting burglary devices.

715, 715-8, 715-16 Zone

Expanders

Provides 12 VDC Class B powered zones for connecting smoke detectors, glassbreak

detectors, and other 2- or 4-wire devices.

DMP Two-Way Wireless Devices

1100D/*1100DH/*1100DI Wireless

Receivers

Supports transmitters in residential or commercial wireless operation.

1101 Universal Transmitter Provides both internal and external contacts that may be used at the same time to yield two

individual reporting zones from one wireless transmitter.

1102 Universal Transmitter Provides an external contact.

* 1114 Four-Zone Expander Provides four wireless zones

* 1116 Relay Output Provides one Form C relay

* 1117 LED Annunciator Provides a visual system status indicator

* 1121 PIR Motion Detector Provides motion detection with pet immunity.

1125 PIR Motion Detector Provides multiple lens congurations, dual coverage area selection, and sensitivity

adjustments.

* 1129 Glassbreak Detector Detects the shattering of framed glass mounted in an outside wall and provides full-pattern

coverage and false-alarm immunity.

* 1139 Bill Trap Provides a silent alarm option for retail and banking cash drawers.

1142BC Two-button Panic Belt

Clip Transmitter

Provides portable two-button panic operation.

1142 Two-button Panic

Transmitter

Provides permanently mounted under-the-counter two-button panic operation.

* 1145 (Four-Button)

* 1146 (Two-Button)

* 1147 (One-Button)

Key Fob transmitters designed to clip onto a key ring or lanyard.

*These devices have not been investigated by a Nationally Recognized Testing Laboratory (NRTL).

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 30 31

Comentários a estes Manuais

Sem comentários

Digital Monitoring Products XR20 Guia de Instalação Página 9

Comentários a estes Manuais

Manuais e produtos relacionados com Sistemas de segurança - controlo de acesso Digital Monitoring Products XR20