Digital Monitoring Products XT50 Guia de Instalação descarregar pdf (Página 18)

XT Series Programming Guide Digital Monitoring Products

NETWORK OPTIONS

Network Options

Network Options are provided to dene the network conguration for the panel. This information will be

used during communication of messages via network or Email.

Note: IP addresses and port numbers may need to be assigned by the network administrator. When

entering an IP, Gateway, or Subnet Mask address be sure to enter all 12 digits and leave out the periods.

For example, IP address 192.168.000.250 is entered as 192168000250.

4.1 DHCP Mode Enabled

If the panel uses a dynamic IP address Select YES. When set to YES the panel will

operate in DHCP and will not use the Local IP Address number. When the DHCP option

is set to NO, the panel will use the IP address entered in Local IP Address. The default

value for DHCP mode is YES.

4.2 Local IP Address

Enter the local IP address for the panel. The Local IP Address must be unique and cannot

be duplicated on the network. The default local IP address is 192.168.0.250.

4.3 Gateway Address

Enter the local gateway address. The Gateway IP Address is needed to exit the local

network. The default gateway address is 192.168.0.1.

4.4 Subnet Mask

Enter the local subnet mask assigned to the panel. The default subnet mask address is

255.255.255.000.

4.5 DNS Server

Enter the IP address of the DNS (Domain Name System) used by the panel to resolve

domain names into IP addresses. The default address is 0.0.0.0.

4.6 Programming Port

Enter the programming port number. The programming port identies the port used to

communicate messages to and from the panel. The default Programming Port setting is

2001.

DHCP NO YES

LOCAL IP ADDR

192.168.0.250

GATEWAY ADDR

192.168.0.1

SUBNET MASK

255.255.255.0

DNS SERVER

0.0.0.0

PROGRAMMING PORT

2001

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 54 55

Sem comentários

Digital Monitoring Products XT50 Guia de Instalação Página 18