Digital Monitoring Products XR550 Manual de Instruções descarregar pdf (Página 22)

Digital Monitoring Products XR150/XR350/XR550 Series Programming Guide

NETWORK OPTIONS

Network Options (Network or Encryption Only)

Network Options are provided to dene the network conguration for the panel. This information will be used

during communication of messages via network.

Note: IP addresses and port numbers may need to be assigned by the network administrator. When entering an IP,

Gateway, or Subnet Mask address be sure to enter all 12 digits and leave out the periods. For example, IP address

192.168.000.250 is entered as 192168000250.

4.1 DHCP Mode Enabled

If the panel uses a dynamic IP address select YES. When set to YES, the panel operates

using DHCP and does not use the Local IP Address number. When the DHCP option is set to

NO, the panel uses the IP address entered in Local IP Address. The default value for DHCP

mode is YES.

4.2 Local IP Address

Enter the local IP address. The Local IP Address must be unique and cannot be duplicated.

The default local IP address is 192.168.0.250.

4.3 Gateway Address

Enter the local gateway address. The Gateway IP Address is needed to exit your local

network. The default gateway address is 192.168.0.1.

4.4 Subnet Mask

Enter the local subnet mask assigned to the panel. The default subnet mask address is

255.255.255.000.

4.5 DNS Server

Enter the IP address of the DNS (Domain Name System) used by the panel to resolve domain

names into IP addresses. The default address is 192.168.0.1.

4.6 Passphrase (XR550 with Encryption only)

To enable encryption type an 8 to 16-character Passphrase using alphanumeric characters.

If you leave the Passphrase blank, the panel communicates with the SCS-1R Receiver, but

the data is not encrypted. The Passphrase is blank by default.

An XR550 panel with encryption is capable of communicating 128-bit or 256-bit encrypted

data to an SCS-104 line card installed at the receiver. The XR550 panel with encryption and

the receiver SCS-104 line card must have the same password called a Passphrase.

Note: DO NOT LOSE THE PASSPHRASE. A lost or forgotten Passphrase requires that the XR550

panel and every SCS-104 line card at the receiver be individually reprogrammed with a new

passphrase.

Note: An XR550 panel with encryption communicates using AES encryption. If you currently

have an XR550 panel with network installed, you may purchase a separate feature key to

activate encrypted communications using the Feature Upgrade process described in the

Feature Upgrade Section. Encrypted communication cannot be enabled on a standard

XR550 panel.

Note: 256-bit encrypted messages to the SCS-1R receiver only communicate when using

SCS-104 Receiver Line Cards with Version 102 or higher software.

4.7 734N Listen Port.

Enter the port number that the 734N/734N-WiFi will use to send communication to

the panel. This must be the same port that is programmed in Panel IP Port within the

734N/734N-WiFi Communication programming menu.

Note: The 734N Listen Port cannot be the same as the panel network programming port.

4.8 734N Passphrase

Enter an 8 to 16-character Passphrase to encrypt communication with the

734N/734N-WiFi module. The 734N Passphrase must match the 734N Passphrase entered in

Communication programming of the 734N. The Passphrase is blank by default.

Note: A passphrase is required for operation.

DHCP NO YES

LOCAL IP ADDRESS

192.168.0.250

GATEWAY ADDRESS

192.168.0.1

SUBNET MASK

255.255.255.000

DNS SERVER

192.168.0.1

PASSPHRASE

734N LISTEN

PORT: 2002

734N PASSPHRASE

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 77 78

Comentários a estes Manuais

Sem comentários

Digital Monitoring Products XR550 Manual de Instruções Página 22

Comentários a estes Manuais

Manuais e produtos relacionados com Sistemas de segurança - controlo de acesso Digital Monitoring Products XR550