Digital Monitoring Products XR550 Manual de Instruções descarregar pdf (Página 32)

Digital Monitoring Products XR150/XR350/XR550 Series Programming Guide

REMOTE OPTIONS

7.12.5 Entré Backup TCP Port

This option displays only if NET is chosen for the Entré connection. Enter the backup

programming port number for the outbound Entré connection in case the connection to the

primary IP fails. Default is 2001.

7.12.6 Entré Checkin

Select the rate at which check-in messages are sent over the Entré connection. Select 0

(zero) to disable check in messages. Range is 0, 3-240 minutes. Default is 0.

7.12.7 Entré Passphrase

To enable encryption enter an 8 to 16-character Passphrase using alphanumeric characters.

If you leave the Passphrase blank, the panel communicates with Entré, but the data is not

encrypted. The Passphrase is blank by default.

7.13 Send Local Changes

This option allows the panel to automatically update Remote Link at the central station

with any changes made to the panel.

Select NET or DD to send local programming changes or User Menu changes to user codes,

user proles, schedules, or holiday dates to Remote Link after exiting the programming or

User Menu. If NET is selected, changes are sent using Network. If DD is selected, changes

are sent using Dialer. Default is NO to disable this feature.

7.13.1 Remote Change IP

This option displays when NET is selected for Send Local Changes. Enter the IP address

containing up to 12 digits. The Net IP Address must be unique and cannot be duplicated

on the network. Enter all 12 digits and leave out the periods. For example, enter IP

address 192.168.0.250 as 192168000250. The periods display automatically. Default is

000.000.000.000

7.13.2 Remote Change Port

This option displays when NET is selected for Send Local Changes. Enter the Port number.

Valid numbers are from 0 to 65535. Default is 2002.

7.13.3 Remote Telephone Number

This option displays when DD is selected for Send Local Changes. Press COMMAND to

enter the phone number the panel dials when sending programming changes. After entering

a phone number, the panel sends any panel changes to Remote Link.

The phone number can have two lines of 16 characters each to equal 32. Enter a P to

program a two second pause in the dialing sequence. The P character counts as part of the

32 allowable characters. Enter *70P as the string rst characters to cancel call waiting. Dial

tone detect is an automatic panel function.

7.14 App Key

Enter the 8-digit App Key obtained in your Dealer Settings tab at

vk.securecomwireless.com.

This option is a security feature of the Virtual Keypad iPhone/Android App used only

when your Dealer Settings at vk.securecomwireless.com have “EASYconnect” set as the

Communication Type.

This communication option is only available for panels with onboard network and is used to

eliminate the need for a static IP address programmed in Network Options. To enter a new

App Key, press any Select key and enter any combination of 8 digits. Press COMMAND. The

default for this option is blank.

ENTRE BACKUP TCP

PORT: 2001

ENTRE CHECKIN

MINUTES: 0

ENTRE PASSPHRASE

CHANGES? NO

NO NET DD

SEND LOCAL

REMOTE CHANGE IP

000.000.000.000

REMOTE CHANGE

PORT: 2002

REMOTE PHONE NO.

APP KEY:

1 2 ... 27 28 29 30 31 32 33 34 35 36 37 ... 77 78

Comentários a estes Manuais

Sem comentários

Digital Monitoring Products XR550 Manual de Instruções Página 32

Comentários a estes Manuais

Manuais e produtos relacionados com Sistemas de segurança - controlo de acesso Digital Monitoring Products XR550