Digital Monitoring Products XR550 Manual de Instruções descarregar pdf (Página 54)

Digital Monitoring Products XR150/XR350/XR550 Series Programming Guide

ZONE INFORMATION

18.4 Zone Type

The Zone Type denes the panel response to the zone being opened or shorted. This is

called the Alarm Action. There are up to 13 possible alarm action responses depending on

the zone type and any restrictions it may have. See the Zone Type chart in the Appendix.

When you assign a Zone Type to a zone, automatic zone responses are made. There are 12

Zone Types to choose from. Application descriptions for each zone type can be found in the

Appendix of this manual.

To enter a new Zone Type, press any Select key. The display lists all of the available

Zone Types four at a time.

Blank, Night, Day, or Exit. Press COMMAND for additional zone types.

Fire, Panic, Emergency, or Supervisory. Press COMMAND for additional zone types.

Auxiliary 1, Auxiliary 2, Fire Verify, or Arming (keyswitch). Press COMMAND for additional

zone types.

If you select Blank, Night, Day, Exit, Auxiliary 1, Auxiliary 2, or Arming as the Zone

Type, the zone must be assigned to an active area. If you select Fire, Fire Verify, Panic,

Emergency, or Supervisory as the Zone Type, it is a 24-hour zone that is always armed and

no area assignment is needed.

Zone Type Specications

The panel contains 12 default zone types for use in conguring the system. These zone

types provide the most commonly selected functions for their applications. All zone types

except the Arming zone type can be customized by changing the options listed below.

Arming zone type programming continues at Arming Zone Area Assignment.

Refer to the Appendix for complete zone type descriptions.

18.5 Area Assignment

Enter the area number where the Night, Day, Exit, Auxiliary 1, or Auxiliary 2 zone is being

assigned. For an Area system, area numbers 1-32 can be assigned. For a Home/Sleep/Away

with Guest system, area numbers 1-9 can be assigned.

In an All/Perimeter or Home/Sleep/Away system, the currently selected area, Perimeter,

Interior, Bedroom displays.

On an All/Perimeter system, select INT to program zones for the interior area and select

PERIM to program zones for the perimeter area.

On a Home/Sleep/Away system, select INT to program zones for the interior area, select

BDRM to program zones for the bedroom area, and select PERIM to program zones for the

perimeter area.

18.6 Fire Bell Output

This output (1 to 6, 500 to 999, F1 to F20, G1 to G20, or D1 to D16) is turned on any time a

Fire, Fire Verify, or Supervisory zone is placed in alarm. The output is turned off by any the

following actions:

• When the User Menu Alarm Silence function is performed.

• When a valid user code is entered to silence the bell.

• When the Silence key is pressed on the 630F Remote Fire Command Center.

• Using the Outputs On/Off function in the User Menu.

• The expiration of the Bell Cutoff time.

This output can be connected to a lamp, LED, or buzzer using the DMP Model 716 Output

Expansion Module.

18.7 Arming Zone Area Assignment

In an Area or Home/Sleep/Away with Guest system, if the zone has been programmed as an

Arming Type (AR), enter the areas that the zone controls.

When the zone changes from normal to shorted, the programmed areas toggle between the

armed or disarmed condition using the Style programming below. When restored to normal,

no action occurs. When the zone is opened from a normal (disarmed) state, a trouble is

reported. When opened from a shorted (armed) state, an alarm is reported and the zone is

disabled until you disarm the area(s) from either a keypad or Remote Link™ computer.

ZONE TYPE: BLANK

- - NT DY EX

FI PN EM SV

A1 A2 FV AR

AREA NO: -

AREA: PERIMETER

INT PERIM

INT BDRM PERIM

FIRE BELL OUT: 0

ARM/DIS AREAS

1 2 ... 49 50 51 52 53 54 55 56 57 58 59 ... 77 78

Comentários a estes Manuais

Sem comentários

Digital Monitoring Products XR550 Manual de Instruções Página 54

Comentários a estes Manuais

Manuais e produtos relacionados com Sistemas de segurança - controlo de acesso Digital Monitoring Products XR550