Digital Monitoring Products XR550 Manual de Instruções descarregar pdf (Página 29)

XR150/XR350/XR550 Series Programming Guide Digital Monitoring Products

DEVICE SETUP

6.19.12 User Code Length

Dene the number of User Code bits. Press any top row Select key to enter a custom

number. On a 734 module, custom numbers can only be between 16-40.

On a 734N/734N-WiFi module, custom numbers can be between 1-255. The default is 16.

6.19.13 Require Site Code

Press the top row Select key under YES to use a site code.

In addition to User Code verication, door access is only granted when any one site code

programmed at the SITE CODE ENTRY option matches the site code received in the Wiegand

string.

6.19.13.1 Site Code Display

734 Module: You can program up to 8 three-digit site codes. Site code range is 0-999.

Any previously programmed site codes display. Dashes represent blank site codes.

Default is blank.

Note: A card with a site code greater than three digits cannot be used. Use only cards

with three-digit site codes.

734N/734N-WiFi Module: You can program up to 8 ve-digit site codes. Site code range

is 1-65535. Any previously programmed site codes display. Site Code 1 defaults to 127.

Site Codes 2-8 default to blank. Dashes represent blank site codes.

Site Code 1 displays rst. Enter a site code number followed by the Command key to

advance to the next option, Site Code 2. To delete an existing site code, press any

Select key. Either enter a new site code followed by Command, or press Command to

leave blank and continue to the next site code. Repeat these steps to change, delete, or

add up to 8 site codes.

6.19.14 Number of User Code Digits

The 734 module recognizes user codes from 4-12 digits in length. The 734N

/734N-WiFi

mod-

ule recognizes user codes from 1-12 digits in length. Press any top row Select key

to enter a user code digit length. This number must match the user code number length be-

ing used by the panel. Default is 5. For an Area System, use 4 to 12 digits (typically 5).

For all other systems and panels, use 4 digits.

Any selection above 5 digits require entry of the custom card denitions with custom site

and user code positions for the Wiegand string. When searching the bit string for the user

code, the digits are identied and read from left to right.

6.19.15 No Communication with Panel

This option denes the relay action when communication with the panel has not occurred

for approximately ten seconds. Press any top row Select key to display relay action options.

Press the Back Arrow key to return to the NO OF USER CODE DIGITS:.

Choose the action required:

Press the rst Select key to choose OFF [Default] (Relay Always Off) — The relay does not

turn on when any Wiegand string is received. Off does not affect any REX operation.

Press the second Select key to choose SITE (Accept Site Code) — Door access is granted

when the Wiegand site code string received matches any site code programmed at SITE

CODE ENTRY. For details refer back to the REQUIRE SITE CODE option.

Press the third Select key to choose ANY (Any Wiegand Read) — Door access is granted when

any Wiegand string is received.

Press the fourth Select key to choose ON (Relay Always On) — The relay is always on.

Press the COMMAND key to display the next action.

Press the rst Select key to choose LAST (Keep Last State) — The relay remains in the same

state and does not change when communication is lost.

After choosing the action, the NO COMM WITH PNL option and the newly dened action

display. Programming is now complete. Press the COMMAND key to display DEVICE NO

USER CODE

LENGTH: 16

REQUIRE SITE

CODE? NO YES

SITE CODE 1: -

SITE CODE 1:

(1-65,535) 127

NO. OF USER CODE

DIGITS: 5

NO COMM WITH PNL

OFF SITE ANY ON

NO COMM WITH PNL

OFF

NO COMM WITH PNL

SITE

NO COMM WITH PNL

ANY

NO COMM WITH PNL

LAST

1 2 ... 24 25 26 27 28 29 30 31 32 33 34 ... 77 78

Comentários a estes Manuais

Sem comentários

Digital Monitoring Products XR550 Manual de Instruções Página 29

Comentários a estes Manuais

Manuais e produtos relacionados com Sistemas de segurança - controlo de acesso Digital Monitoring Products XR550