Digital Monitoring Products XR550 Manual de Instruções descarregar pdf (Página 62)

Digital Monitoring Products XR150/XR350/XR550 Series Programming Guide

ZONE INFORMATION

18.23 Cross Zone

Select YES to enable cross zoning for this zone. Cross zoning requires one or more armed

zones to fault within a programmed time before an alarm report is sent to the receiver.

When the rst cross zoned zone trips, the cross zone time specied in System Options

begins to count down. When a second cross zoned zone trips or the rst zone trips a

second time before the end of the count down, the bell action assigned to the zone

activates and the panel sends an alarm report for both zones.

If no other cross zoned zone trips before the cross zone time expires, the panel sends

only a zone fault report to the receiver.

Cross zoning is not compatible with all zone types: You can not enable cross zoning for

Fire verify zones or for any Fire zones that have Retard Delay enabled.

18.24 Priority

Select YES to provide additional protection for the premises by requiring this zone to be

in a normal condition before its assigned area can be armed.

18.25 Fire Panel Slave Input

This option is available on Fire Zones (FI) only and allows a re zone the ability to

provide slave communication operation for a separate re alarm control panel. If YES,

this zone will transmit a restoral immediately when restored by the re panel being

monitored. A sensor reset is not required to generate the restoral message.

If NO, this zone will operate as a standard re type zone and a sensor reset is required

before the zone will return to normal. Default is NO.

18.26 Area Follower

Allows Night, Day, Aux 1, or Aux 2 burglary zones to be delayed by following any exit or

entry delay that is currently running in the area that is specied. Default is 0.

18.27 Zone Real-Time Status

Selecting YES allows Real-Time Status reports, such as Door Open or Closed with zone

number, to be sent using PC Log reporting. Selecting NO disables Real-Time Status for

this zone. Default is NO.

18.28 TrafcCount

This option is only displayed for NT and EX type zones. Select YES to provide reporting

to the receiver of the number of zone trips while in a disarmed state. The number

of trips will be included with the area closing message and reported to the central

station automation system. Trafc Count data for the 10 lowest numbered zones

with Trafc Count set to YES is also sent to the Virtual Keypad

App if enabled at

vk.securecomwireless.com. Default is NO.

18.29 Zone Audit Days

Enter the number of days (0 to 365) allowed to elapse without the zone being tripped

before a fault message is sent. The message is sent to the receiver(s) programmed

to receive Supervisory/Trouble Reports at 10:00 am following the expiration of the

timer. Each time the zone is tripped, the Zone Audit Days timer restarts and begins

to countdown the number of days programmed. After the countdown expires, a fault

message is sent and the Zone Audit Days timer restarts and begins to countdown the

number of days programmed. Available for all zone types except re and re verify.

Enter 0 (zero) to disable this function. Default is 0 (zero).

18.30 Report with Account Number for Area

This option is only available for 24-hour zone types (Fire, Fire Verify, Panic, Emergency,

or Supervisory).

Enter the area number (1-32) to assign as a 24-hour zone type. This option

sends the

account number of the programmed area with messages. If the entered area number

does not exist or is not valid, the account number programmed in the Communication

section is sent. Select 0 (zero) to have the report sent with the account number

programmed in Communication. Default is 0.

CRS ZONE NO YES

PRIORITY NO YES

FIRE PANEL SLAVE

INPUT: NO YES

FOLLOW AREA: 0

ZONE REAL-TIME

STATUS NO YES

TRAFFIC COUNT

NO YES

ZONE AUDIT DAYS:

REPORT WITH ACCT

NO. FOR AREA: 0

1 2 ... 57 58 59 60 61 62 63 64 65 66 67 ... 77 78

Comentários a estes Manuais

Sem comentários

Digital Monitoring Products XR550 Manual de Instruções Página 62

Comentários a estes Manuais

Manuais e produtos relacionados com Sistemas de segurança - controlo de acesso Digital Monitoring Products XR550