Digital Monitoring Products XR550 Manual de Instruções descarregar pdf (Página 25)

XR150/XR350/XR550 Series Programming Guide Digital Monitoring Products

DEVICE SETUP

6.8 Egress Areas

Press the COMMAND key to program Egress Areas. To select an area, enter the area number

using the digit keys on the keypad. When an area is selected, an asterisk appears next

to the area number. Enter the number again to deselect the area. Press COMMAND to

display the next set of areas. Refer to the Multiple Displays section at the beginning of this

document.

Note: For an All/Perimeter, Home/Sleep/Away, or Home/Sleep/Away with Guest system,

Egress Areas should be left at factory default settings.

Note: If an area is programmed as an access area, it cannot be programmed as an egress

area and therefore does not display during Egress Areas programming.

Use this option to detect Anti-passback violations. Anti-passback requires a user to properly

exit (egress) an area they have previously accessed. If users fail to exit through the proper

card reader location they are not granted access on their next attempt.

Users must have matching access area numbers assigned to their prole, to receive a door

access at this device. If the user is programmed for Anti-Pass YES, then the user is

logged out of all matching areas. This allows the user to again access the area. See Access

Areas section.

If you do not enter any area numbers, all users with Door Access authority receives a door

access without regard to schedules. If you are not using the Anti-Pass feature leave Egress

Areas blank.

6.9 Display Areas

Press the COMMAND key to program Display Areas. To select an area between 1 up to

32, enter the area number using the keypad digit keys. When an area is selected, an

asterisk appears next to the area number. Enter the number again to deselect the area.

Press COMMAND to display the next set of areas. Default is all area numbers. Refer to the

Multiple Displays section at the beginning of this document.

Display Areas allows the panels burglary activities to be segmented so that only specic

area(s) and their associated operation appear at a particular keypad. Area number(s)

selected in this eld affect the way users interact with the system from this particular

device. For example: Program Device 1 to show only the zone activities and armed status

of Area 1.

Enter the area number(s) that this keypad is to display. This allows specic area control

from specic keypads, as well as annunciation of zones assigned to those area(s). When

Display Areas is left defaulted (all areas selected), Menu Display and Status List items

determine whether zone alarms and troubles display at this device, regardless of area

assignment.

Also, all system areas may be armed and disarmed from this device.

Note: For an All/Perimeter or Home/Sleep/Away system, Display Areas should be left at

factory default settings.

For Home/Sleep/Away with Guest arming systems, the Display Areas selection determines

which system the keypad arms and disarms. With areas 1, 2 or 3 being the rst areas

selected, the keypad is assigned to the Main system. With area 4, 5 or 6 being the rst

areas selected, the keypad is assigned to the Guest 1 system. With area 7, 8 or 9 being

the rst areas selected, the keypad is assigned to the Guest 2 system. Keypads can have

additional areas assigned for Event Display.

User Action Allowed

When an area(s) is selected, the following user actions are allowed:

• Arming or Disarming of the area(s) selected from the ARM or DISARM menu

• Alarm Silence for the area(s) selected

• Zone Bypass of zones assigned to the area(s) selected

• Zone Monitor of zone assigned to the area(s) selected

• Shift schedule changes allowed for the area(s) selected

• Closing Check Schedule Extend is allowed for the area(s) selected

• Door Schedules changes are allowed for devices that have a matching area(s)

as dened in Device Access Areas

• Door On/Off Menu operation is allowed for devices that have a matching area(s)

as dened in Device Access Areas

Note: The previous user actions also require the matching area(s) be programmed in User

Prole: Arm/Disarm area(s).

Status Display Allowed

EGRESS AREAS:

DISPLAY AREAS:

*1 *2 *3 *4

*5 *6 *7 *8

*9 *10 *11 *12

*13 *14 *15 *16

*17 *18 *19 *20

*21 *22 *23 *24

*25 *26 *27 *28

*29 *30 *31 *32

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 77 78

Comentários a estes Manuais

Sem comentários

Digital Monitoring Products XR550 Manual de Instruções Página 25

Comentários a estes Manuais

Manuais e produtos relacionados com Sistemas de segurança - controlo de acesso Digital Monitoring Products XR550